Installation Of Roller Blinds
1. Measure The Length Of The Window Where You Want To Install The Roller Blind.
2. Cut Drive Tube To required Length.
3. Insure The Tube Edge Is Clean And Burr Free.
4. Mount Crown And Drive Adapter On The Motor.
5. Make Sure That Drive Adapter Fits Firmly And Crown Rotates Freely.
6. Align The Notches On The Crown And Drive Adapter With The Drive Tube.
7. Slide And Fit The Motor Into Drive Tube.
8. Mount Idler On Both Sides.
9. Fix The Motor Drive Tube In The Brackets.
Related Articles
How To Pair Remote To Roller Blinds
1. Turn OFF Motor And Turn ON After 5 Seconds 2. You Listen Long Beep Sound. 3. After Long Beep Press P2 Button Beside The Battery Of Remote. 4. Again Press P2 Button. 5. Now Press UP Or DOWN Button. 6. Motor Is Paired With Emmiter
Installation Of Double Side Closing Curtain
1. Measure The Distance Where You Want To Install The Curtain. 2. Cut The Curtain Track As Measured Distance. 3. Assemble The Accessories for Unit Driver. 4. Insert The Belt Through Curtain Track And Unit Driver. 5. Install The Belt Clip On First End ...
Installation Of Single Sided Open Curtain
1. Measure The Distance Where You Want To Install The Curtain. 2. Cut The Curtain Track As Measured Distance. 3. Assemble The Accessories for Unit Driver. 4. Insert The Belt Through Curtain Track And Unit Driver. 5. Install The Belt Clip On First End ...